Warr Trey Gun Signature Series TGSS 12-String
12 Piezo / 12 MIDI
Buckeye Burl top on a Mahogany body core and a Wenge pinstripe
Warr Custom Hand-wound Pickups
Custom wood pickup shells and knobs

Order your Warr Guitar "Artist" Today!

For pricing, please visit the Warr Guitars "Prices" page.

To start your Warr Guitar, we require an $1,100 deposit.  The balance for your Warr Guitar is due at completion. 

For your ease and convenience, you can go directly to the Warr Guitars "Store" site to make your $1,100 deposit. Though you are welcome to make a deposit on your Warr Guitar now, often times the customer has made contact with us at sales@warrguitars.com or by phone at 805 559-1892 to discuss the type of tone and look they desire for their Warr Guitar. When we receive notice of your deposit and you have not yet discussed wood and tone choices, we will immediately contact you to discuss these details.  Once the details have been decided, Warr Guitars will then send an invoice to the customer with all the details of your Warr Guitar order.  When you receive your detailed invoice, please look it over carefully to make sure everything is correct.  At that time we can make any necessary changes.  Once the customer states that all the details in their order are correct, Warr Guitars will then proceed to start your personal Warr Guitar.

Please understand that though many woods are standard in the prices of your Warr Guitar, we do offer many highly figured or hard to find wood choices that could add to the price of your Warr Guitar; please call or email us to discuss those choices.  Warr Guitars will always try to get the best price for these optional upgrade woods for you the customer.

Disclaimer: For certain major customizations we may require a larger deposit.

Trey Gunn Signature Series TGSS

14 Degree Tilt-back Headstock:
This steeper angle increases sustain and tone. It is a superior design to the non-tilt-back style headstock. It takes more wood and labor to achieve the construction of this type of headstock. Furthermore, it is more difficult to locate the proper quarter-sawn laminates to achieve this design. Though this increases the cost of wood and labor, the resulting quality in tone is noticeable and worth it!

Graphite Neck Reinforcement:
Our findings show that an all graphite neck tends to be a bit sterile sounding, lacking the warmth of wood. However, using graphite as a structural reinforcement increases the rigidity of the neck, adding deeper tone while maintaining the warm characteristics of the wood. This design also increases sustain, making it the optimal choice!

Bridge placement on the node:
There is a place on the guitar body, that when tapped, you will hear a focused resonant note. This is where we place the bridge on the TGSS model. The advantage to this is, that it further reduces any dead notes, and helps to produce even volume levels from string to string. This results in a larger body design with increased mass. More mass, more tone.

The Drum Theory:
The body of the TGSS has been elongated with bridge placement nearer to the center. Imagine a drum. When the drum is struck on the edge, you get a thin drum tone. When it is struck in the center, you get a full drum tone. The same applies to instrument design.

Weighted Tuned Headstock "WTH":
We have added a proprietary technology to the construction of the TGSS model headstock. The design consists of a tuned placement of mass contained within the headstock. The result is a fuller, deeper bottom-end, heard on all notes. Furthermore, It helps in producing a more even volume level from string to string.

The Warr "TGSS" series comes with 18-volt active electronics, dual truss rod adjustment, custom designed saddles and bridge plate, Sperzel locking tuners, slider strap, and a soft gig bag.

Many wood choices are included with your Warr Guitar including loosely figured wood tops. 5 to 7 piece laminate neck and an added pin stripe laminate between the top and body core. We do have highly figured or hard to get interesting wood choices for guitar tops at extra cost.

You can order your tuning in various configurations;
Standard (crossed hand): Bass inverted 5ths / Melody Acending 4ths
Un-crossed: 4ths bass / 4ths melody

Options for your Warr "TGSS"
Hand-wound custom built Warr pickups
Hand-turned wood knobs and pickup shells that match your Warr Guitar
Neck-thru construction
Custom polyurethane finishes